
The OEM recommends replacing the rubber snap-in TPMS valve whenever the sensor is removed from the wheel. The rubber snap-in valve is attached to the sensor module by a TORX screw with a recommended torque specification of 11.5 in-lbs or 1.3 N.m.
Welcome to RPS DISTRIBUTORS INC
The OEM recommends replacing the rubber snap-in TPMS valve whenever the sensor is removed from the wheel. The rubber snap-in valve is attached to the sensor module by a TORX screw with a recommended torque specification of 11.5 in-lbs or 1.3 N.m.